Edmonton’s IKEA is on the south side, at South Edmonton Common off 102 Street. Mill Woods, Terwillegar, Windermere and Ellerslie are close by. From St. Albert, Sherwood Park or the north side, it’s a drive around the Henday or through the city.

IKEA’s click and collect here also lets you pick up orders at participating FedEx and Purolator locations, which helps when you only need a few hinges or handles rather than a whole kitchen.

Long winters mean long heating seasons, and furnace-dried air is hard on wood. It gives up moisture and shrinks a little in January, then swells again in a humid July. Careful makers build for that, so ask what each recommends: painted MDF, veneer on a stable core, or solid wood with room to move.

Custom fronts suit Edmonton’s range of housing, from post-war bungalows in Highlands and Bonnie Doon to newer homes in the southwest. Refacing an IKEA kitchen this way keeps the cabinets and fittings and changes only the faces.

On Fronts you can send your IKEA plan once and hear from refacers who measure and install around Edmonton, or makers who ship flat-packed custom doors for IKEA kitchens.

Updated November 6, 2026 · Sources

IKEA Edmonton is at 1311 102 Street NW in South Edmonton Common and is served by ETS routes 512 and 519. ikea.com checked November 6, 2026
IKEA Edmonton’s click and collect orders can be picked up at the store, at a third-party pick-up location, or at participating FedEx and Purolator locations. ikea.com checked November 6, 2026
Wood gains or loses moisture to match the humidity around it, shrinking as it dries and swelling as it takes moisture back on. fpl.fs.usda.gov checked November 6, 2026

Questions about custom IKEA doors and fronts in Edmonton

Where is the IKEA store in Edmonton?

IKEA Edmonton is at 1311 102 Street NW in South Edmonton Common, and ETS routes 512 and 519 serve it. Besides picking up at the store, IKEA’s click and collect lets you choose a third-party pick-up location or a participating FedEx or Purolator location, which is handy for small add-ons ordered after the main kitchen.

Source

Which front materials cope with dry winter air?

Painted MDF and veneer on a stable core tend to move less than solid wood, because their cores don’t shrink and swell as much. Solid wood still works when it’s built as a frame around a floating panel. Keeping indoor humidity steady through the winter helps whichever you choose. Ask makers what they recommend for Alberta homes.

Source

Can I mix custom fronts with IKEA’s own doors?

Yes. Some people order made-to-measure fronts only for the parts that show most, such as the island or the run facing the living room, and keep IKEA doors inside a pantry or laundry room. Colours and edges won’t match exactly, so separate them by room or by a deliberate change of material rather than placing them side by side.